Show, Clear, Debug Commands
Page 490 7210 SAS-X, R6 OS Services Guide
Bridge Hello time
Specifies the amount of time between the transmission of Configura-
tion BPDUs.
Bridge max age
Specifies the maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded. This is the
actual value that this bridge is currently using.
Bridge priority
Defines the priority of the Spanning Tree Protocol instance associated
with this service.
Topology change
Specifies whether a topology change is currently in progress.
Last Top. change
Specifies the time (in hundredths of a second) since the last time a
topology change was detected by the Spanning Tree Protocol instance
associated with this service.
Top. change count
Specifies the total number of topology changes detected by the Span-
ning Tree Protocol instance associated with this service since the man-
agement entity was last reset or initialized.
Root bridge-id
Specifies the bridge identifier of the root of the spanning tree as deter-
mined by the Spanning Tree Protocol instance associated with this ser-
vice. This value is used as the Root Identifier parameter in all
Configuration BPDUs originated by this node.
Root path cost
Specifies the cost of the path to the root bridge as seen from this
bridge.
Root forward delay
Specifies how fast the root changes its state when moving toward the
forwarding state.
hello time
Specifies the amount of time between the transmission of configura-
tion BPDUs.
Root max age
Specifies the maximum age of Spanning Tree Protocol information
learned from the network on any port before it is discarded.
Root priority
This object specifies the priority of the bridge that is currently selected
as root-bridge for the network.
Root port
Specifies the port number of the port which offers the lowest cost path
from this bridge to the root bridge.
SAP Identifier
The ID of the access port where this SAP is defined.
RSTP State
The operational state of RSTP.
STP Port State
Specifies the port identifier of the port on the designated bridge for this
port's segment.
BPDU encap
Specifies the type of encapsulation used on BPDUs sent out and
received on this SAP.
Label Description (Continued)
To Next Page
Loading...
