Alcatel-Lucent 7210 SAS-X - Page 491

VLL Show Commands
7210 SAS-X, R6 OS Services Guide Page 491
Sample Output
A:Dut-A>show>service>id# stp
===============================================================================
Stp info, Service 305
===============================================================================
Bridge Id : 00:0d.00:20:ab:cd:00:01 Top. Change Count : 5
Root Bridge : This Bridge Stp Oper State : Up
Primary Bridge : N/A Topology Change : Inactive
Mode : Rstp Last Top. Change : 0d 08:35:16
Vcp Active Prot. : N/A
Root Port : N/A External RPC : 0
===============================================================================
Stp port info
===============================================================================
Sap/Sdp Id Oper- Port- Port- Port- Oper- Link- Active
State Role State Num Edge Type Prot.
-------------------------------------------------------------------------------
1/1/16:305 Up Designated Forward 2048 False Pt-pt Rstp
lag-4:305 Up Designated Forward 2000 False Pt-pt Rstp
1217:305 Up N/A Forward 2049 N/A Pt-pt N/A
1317:305 Up N/A Forward 2050 N/A Pt-pt N/A
1417:305 Up N/A Forward 2051 N/A Pt-pt N/A
1617:305 Pruned N/A Discard 2052 N/A Pt-pt N/A
===============================================================================
A:Dut-A>show>service>id#
A:Dut-A>show>service>id# stp detail
===============================================================================
Spanning Tree Information
===============================================================================
VPLS Spanning Tree Information
-------------------------------------------------------------------------------
VPLS oper state : Up Core Connectivity : Down
Stp Admin State : Up Stp Oper State : Up
Mode : Rstp Vcp Active Prot. : N/A
Bridge Id : 00:0d.00:20:ab:cd:00:01 Bridge Instance Id: 13
Port Number
Specifies the value of the port number field which is contained in the
least significant 12 bits of the 16-bit port ID associated with this SAP.
Priority
Specifies the value of the port priority field which is contained in the
most significant 4 bits of the 16-bit port ID associated with this SAP.
Cost
Specifies the contribution of this port to the path cost of paths towards
the spanning tree root which include this port.
Fast Start
Specifies whether Fast Start is enabled on this SAP.
Designated Port
Specifies the port identifier of the port on the designated bridge for this
port's segment.
Designated Bridge
Specifies the bridge identifier of the bridge which this port considers to
be the designated bridge for this port's segment.
Label Description (Continued)