VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 553
mfib
Syntax mfib [brief] [ip | mac] brief
mfib [group grp-address]
Context show>service>id
Description This command displays the multicast FIB on the VPLS service.
Parameters brief — Displays a brief output.
group grp grp-address — Displays the multicast FIB for a specific multicast group address.
Output Show Output — The following table describes the command output fields:
Sample Output
*A:SAS# show service id 1 mfib
===============================================================================
Multicast FIB, Service 1
===============================================================================
Group Address Sap/Sdp Id Svc Id Fwd/Blk
-------------------------------------------------------------------------------
224.4.4.4 sap:1/1/1 Local Fwd
-------------------------------------------------------------------------------
Number of entries: 1
==============================================================================
A:7210-SAS>show>service>id#
Label Description
Group Address
IPv4 multicast group address.
SAP ID
Indicates the SAP/SDP to which the corresponding multicast stream
will be forwarded/blocked.
Forwarding/Block-
ing
Indicates whether the corresponding multicast stream will be blocked/
forwarded.
Number of Entries
Specifies the number of entries in the MFIB.
Forwarded Packets
Indicates the number of multicast packets forwarded for the correspond-
ing source/group.
Forwarded Octets
Indicates the number of octets forwarded for the corresponding source/
group.
Svc ID
Indicates the service to which the corresponding multicast stream will
forwarded/blocked. Local means that the multicast stream will be for-
warded/blocked to a SAP or SDP local to the service.
To Next Page
Loading...
