Alcatel-Lucent 7210 SAS-X - Page 554

Show, Clear, Debug Commands
Page 554 7210 SAS-X, R6 OS Services Guide
mrouters
Syntax mrouters [detail]
Context show>service>id>igmp-snooping
Description This command displays all multicast routers.
Parameters detail — Displays detailed information.
Sample Output
A:7210-SAS>show>service>id>igmp-snooping# mrouters
===============================================================================
IGMP Snooping Multicast Routers for service 1
===============================================================================
MRouter Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
1.1.1.1 1/1/2 0d 18:31:30 254s 2
-------------------------------------------------------------------------------
Number of mrouters: 1
===============================================================================
A:7210-SAS>show>service>id>igmp-snooping#
mvr
Syntax mvr
Context show>service>id>igmp-snooping
Description This command displays Multicast VPLS Registration (MVR) information.
port-db
Syntax port-db sap sap-id [detail]
port-db sap sap-id group grp-address
port-db sdp sdp-id:vc-id [detail]
port-db sdp sdp-id:vc-id group grp-address
Context show>service>id>igmp-snooping
Description This command displays information on the IGMP snooping port database for the VPLS service.
Parameters group grp-ip-address — Displays the IGMP snooping port database for a specific multicast group
address.
sap sap-id — Displays the IGMP snooping port database for a specific SAP. See Common CLI
Command Descriptions on page 925 for command syntax.