Alcatel-Lucent 7210 SAS-X - Page 561

VPLS Show Commands
7210 SAS-X, R6 OS Services Guide Page 561
Parameters sap sap-id — Displays IGMP snooping statistics for a specific SAP. See Common CLI Command
Descriptions on page 925 for command syntax.
sdp sdp-id — Displays the IGMP snooping statistics for a specific spoke or mesh SDP.
Values 1 — 17407
vc-id — The virtual circuit ID on the SDP ID for which to display information.
Default For mesh SDPs only, all VC IDs.
Values 1 — 4294967295
Sample Output
A:7210-SAS>show>service>id>igmp-snooping# statistics
===============================================================================
IGMP Snooping Statistics for service 1
===============================================================================
Message Type Received Transmitted Forwarded
-------------------------------------------------------------------------------
General Queries 1987001 0 1987001
Group Queries 0 0 0
V1 Reports 0 0 0
V2 Reports 1987002 13200 0
V2 Leaves 0 0 0
Unknown Type 0 N/A 0
-------------------------------------------------------------------------------
Drop Statistics
-------------------------------------------------------------------------------
Bad Length : 0
Bad IP Checksum : 0
Bad IGMP Checksum : 0
Bad Encoding : 0
No Router Alert : 0
Zero Source IP : 0
Wrong Version : 0
Lcl-Scope Packets : 0
Send Query Cfg Drops : 0
Import Policy Drops : 0
Exceeded Max Num Groups : 0
MCS Failures : 0
===============================================================================
A:7210-SAS>show>service>id>igmp-snooping#
endpoint
Syntax endpoint [endpoint-name]
Context show>service>id
Description This command displays service endpoint information.