Alcatel-Lucent 7210 SAS-X - Page 600

Show Commands
Page 600 7210 SAS-X, R6 OS Services Guide
Description This command displays information on a specific service ID.
Parameters service-id — The unique service identification number that identifies the service in the service
domain.
Values service-id: 1 — 214748364
all — Displays detailed information about the service.
base — Displays basic service information.
fdb — Displays FDB entries.
epipe — Displays the e-pipe services associated with the B-VPLS service.
i-vpls — Displays the I-VPLS services associated with this B-VPLS service.
stp — Display STP information.
all
Syntax all
Context show>service>id
Description Displays detailed information for all aspects of the service.
Output Show All Service-ID Output — The following table describes the show all service-id command
output fields:
Label Description
Service Id
The service identifier.
Service Type
Specifies the type of service.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Status Change
The date and time of the most recent status change to this customer.
Last Mgmt Change
The date and time of the most recent management-initiated change to
this customer.
Admin State
The administrative state of the service
Vc Switching
Displays the status of VC switching.
SAP Count
The number of SAPs specified for this service.
Uplink Type
Displays the mode of the device.
Vpn Id
The number which identifies the VPN.
Oper State
The operational state of the service.