Alcatel-Lucent 7210 SAS-X - Page 601

PBB Show Commands
7210 SAS-X, R6 OS Services Guide Page 601
SAP
Displays the SAP ID.
Encap
The value of the label used to identify this SAP on the access port.
QinQ Ethertype
Displays the configured QinQ Ethertype value
Dot1Q Ethertype
Displays the configured Dot1Q Ethertype value
Split Horizon
Group
Displays the split horizon group information
Admin MTU
The desired largest service frame size (in octets) that can be transmit-
ted through the port to the far-end router, without requiring the packet
to be fragmented.
Oper MTU
The actual largest service frame size (in octets) that can be transmitted
through the port to the far-end router, without requiring the packet to
be fragmented.
Ingr IP Fltr-Id
Ingress IP filter ID.
Egr IP Fltr-Id
Egress IP filter ID
Ingr Mac Fltr-Id
Ingress MAC filter ID
Egr Mac Fltr-Id
Egress MAC filter ID
Ingr IPv6 Fltr-Id
Ingress IPv6 filter ID
Egr IPv6 Fltr-Id
Egress IPv6 filter ID
Endpoint
Displays the endpoint name
Acct. Pol
Indicates the accounting policy applied to the SAP.
Collect Stats
Specifies whether accounting statistics are collected on the SAP.
QoS parameters
Ingress qos-pol-
icy
The SAP ingress QoS policy ID.
Classifiers Allo-
cated
Displays the number of classifiers allocated.
Classifiers Used
Displays the number of classifiers used.
Meters Allocated
Displays the number of meters allocated.
Meters Used
Displays the number of meters used.
Ingress Stats
The number of received packets/octets for this SAP.
Egress Stats
The number of packets/octets forwarded out of this SAP.
PBB Tunnel Point parameters
Label Description