Alcatel-Lucent 7210 SAS-X - Page 616

Show Commands
Page 616 7210 SAS-X, R6 OS Services Guide
Sample
*A:7210-SAS>show>service# id 200 stp
===============================================================================
Stp info, Service 200
===============================================================================
Bridge Id : 80:00.00:25:ba:08:f6:20 Top. Change Count : 0
Root Bridge : N/A Stp Oper State : Down
Primary Bridge : N/A Topology Change : Inactive
Mode : Rstp Last Top. Change : 0d 00:00:00
Vcp Active Prot. : N/A
Root Port : N/A External RPC : 0
===============================================================================
Stp port info
===============================================================================
Sap/Sdp Id Oper- Port- Port- Port- Oper- Link- Active
State Role State Num Edge Type Prot.
-------------------------------------------------------------------------------
Backbone VPLS Up N/A Forward 2048 N/A N/A N/A
1/1/15:200 Up N/A Forward 2049 N/A Pt-pt N/A
===============================================================================
*A:7210-SAS>show>service#
isid-using
Syntax isid-using [ISID]
Context show>service
Description This command displays services using ISID.
Parameters ISID — Displays the service using the specified I-component Service ID (ISID).
Values 0 — 16777215
Last Top. Change Specifies the time (in hundredths of a second) since the last time a
topology change was detected by the Spanning Tree Protocol
instance associated with this service.
Root Port Specifies the port number of the port which offers the lowest cost
path from this bridge to the root bridge.
Backbone VPLS Displays the ID of the B-VPLS