Alcatel-Lucent 7210 SAS-X - Page 617

PBB Show Commands
7210 SAS-X, R6 OS Services Guide Page 617
Sample
*A:7210-SAS>show>service# isid-using
===================================================================
Services
===================================================================
SvcId ISID Type b-Vpls Adm Opr SvcMtu CustId
-------------------------------------------------------------------
100 100 i-VPLS 1 Up Up 1514 1
200 200 i-VPLS 2 Up Up 1514 1
1000 1000 Epipe 2 Up Up 1514 1
3000 3000 Epipe 1 Up Up 1514 1
-------------------------------------------------------------------
Matching Services : 4
-------------------------------------------------------------------
===================================================================
*A:7210-SAS>show>service#
i-vpls
Syntax i-vpls
Context show>service>id
Description Displays I-VPLS services associated with the B-VPLS service. This command only applies when the
service is a B-VPLS.
Output Show i-vpls Information — The following table describes service I-vpls output fields.
Label Description
SvcId The service identifier.
ISID Displays the ISID number.
Type Indicates the type of service.
b-Vpls Displays the B-VPLS ID.
Adm Specifies the operating status of the service.
Opr The current status of the service.
SvcMtu Indicates the service MTU value.
CustId Displays the customer ID.