Alcatel-Lucent 7210 SAS-X - Page 619

PBB Show Commands
7210 SAS-X, R6 OS Services Guide Page 619
Sample Output
*A:7210-SAS>show>service# id 2 epipe
===============================================================================
Related Epipe services for b-Vpls service 2
===============================================================================
Epipe SvcId Oper ISID Admin Oper
-------------------------------------------------------------------------------
1000 1000 Up Up
-------------------------------------------------------------------------------
Number of Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:7210-SAS>show>service# id 200 epipe
isid-using
Syntax isid-using [ISID]
Context show>service
Description This command displays the services using ISID.
Parameters ISID — Displays the service using the specified I-component Service ID (ISID).
Values 0 — 16777215
Output Show Epipe Information — The following table describes service Epipe output fields.
Sample Output
*A:7210-SAS>show>service# isid-using
Label Description
SvcId The service identifier.
ISID Displays the ISID number.
Type Indicates the type of service.
b-Vpls Displays the B-VPLS ID.
Admin Specifies the operating status of the service.
Oper The current status of the service.
SvcMtu Indicates the service MTU value.
Customer Id Displays the customer ID.