Alcatel-Lucent 7210 SAS-X - Page 620

Show Commands
Page 620 7210 SAS-X, R6 OS Services Guide
===================================================================
Services
===================================================================
SvcId ISID Type b-Vpls Adm Opr SvcMtu CustId
-------------------------------------------------------------------
100 100 i-VPLS 1 Up Up 1514 1
200 200 i-VPLS 2 Up Up 1514 1
1000 1000 Epipe 2 Up Up 1514 1
3000 3000 Epipe 1 Up Up 1514 1
-------------------------------------------------------------------
Matching Services : 4
-------------------------------------------------------------------
===================================================================
*A:7210-SAS>show>service#
service-using
Syntax service-using [b-vpls] [i-vpls]
Context show>service
Description This command displays the services matching certain usage properties. If no optional parameters are
specified, all services defined on the system are displayed.
Parameters b-vpls — Displays matching Epipe services.
i-vpls — Displays matching VPLS instances.
Output Show Epipe Information — The following table describes service Epipe output fields.
Sample Output
*A:7210-SAS>show>service# service-using b-vpls
===============================================================================
Services [bvpls]
Label Description
Service Id The service identifier.
Type Indicates the type of service.
Admin Specifies the operating status of the service.
Oper The current status of the service.
Customer Id Displays the customer ID.
Last Mgmt Change The date and time of the most recent management-initiated change
to this customer.