Alcatel-Lucent 7210 SAS-X - Page 781

Virtual Private Routed Network Services
7210 SAS-X OS Services Guide Page 781
ipsec-gw
Syntax ipsec-gw name
no ipsec-gw
Context config>service>vprn>if>sap
Description This command configures the IPSec gateway.
Parameters name — Specifies the IPSec gateway name up to 32 characters in length.
default-secure-service
Syntax default-secure-service service-id ipsec-interface ip-int-name
no default-secure-service
Context config>service>vprn>if>sap>ipsec-gw
Description This command specifies a service ID or service name of the default security service used by this SAP
IPSec gateway.
Parameters service-id — Specifies a default secure service.
Values service-id: 1 — 2147483648
default-tunnel-template
Syntax default-tunnel-template ipsec template identifier
no default-tunnel-template
Context config>service>vprn>if>sap>ipsec-gw
Description This command configures the default tunnel policy template for the gateway.
Parameters ipsec template id* — [1..2048]