Alcatel-Lucent 7450 - Page 107

MPLS and RSVP
7450 ESS MPLS Guide Page 107
The PLR node then uses the admin-group constraints along with other constraints, such as hop-
limit and SRLG, to select a manual or dynamic bypass among those that are already in use.
If none of the manual or dynamic bypass LSP satisfies the admin-group constraints, and/or the
other constraints, the PLR node will request CSPF for a path that merges the closest to the
protected link or node and that includes or excludes the specified admin-group IDs.
If the user changes the configuration of the above command, it will not have any effect on existing
bypass associations. The change will only apply to new attempts to find a valid bypass.
3
frr-object
lsp>propagate-admin
group
lsp>frr>no propagate-
admin-group
Admin color constraints
sent
Admin color constraints
not sent
no
4
No frr-object
lsp>propagate-admin
group
lsp>frr>propagate-
admin-group
Admin color constraints
sent
Not present yes
5
No frr-object
lsp>no propagate-admin
group
lsp>frr>propagate-admin-
group
Admin color constraints
not sent
Not present no
6
No frr-object
lsp>propagate-admin
group
lsp>frr>no propagate-
admin-group
Admin color constraints
sent
Not present yes
Table 4: Bypass LSP Admin-Group Constraint Behavior