Alcatel-Lucent 7450 - Targeted Session Parameters

Targeted Session Parameters
Page 628 7450 ESS MPLS Guide
Targeted Session Parameters
Use the following syntax to specify targeted-session parameters:
CLI Syntax: config>router# ldp
targeted-session
disable-targeted-session
export-prefixes policy-name [policy-name...(up to 5 max)]
ipv4
hello timeout factor
keepalive timeout factor
import-prefixes policy-name [policy-name...(up to 5 max)]
peer ip-address
hello timeout factor
keepalive timeout factor
no shutdown
tunneling
lsp lsp-name
The following example displays an LDP configuration example:
A:ALA-1>config>router>ldp# info
----------------------------------------------
...
targeted-session
ipv4
hello 120 3
keepalive 120 3
exit
peer 10.10.10.104
hello 240 3
keepalive 240 3
exit
exit
----------------------------------------------
A:ALA-1>config>router>ldp#