LDP Configuration Management Tasks
Page 636 7450 ESS MPLS Guide
Modifying Interface Parameters
Individual parameters cannot be deleted. The no form of a interface-parameter command reverts
modified values back to the defaults.
The following output displays the default values:
A:ALA-1>config>router>ldp>if-params>if# info detail
----------------------------------------------
no bfd-enable
ipv4
no hello
no keepalive
no local-lsr-id
fec-type-capability
p2mp-ipv4 enable
exit
no transport-address
no shutdown
exit
no shutdown
----------------------------------------------
To Next Page
Loading...
