MPLS and RSVP
7450 ESS MPLS Guide Page 197
LSP Commands
config
— router
— [no] mpls
— [no] lsp lsp-name [bypass-only | p2mp-lsp | mpls-tp src-tunnel-num]
— [no] adaptive
— [no] adspec
— [no] auto-bandwidth
— adjust-down percent [bw mbps]
—no adjust-down
— adjust-up percent [bw mbps]
—no adjust-up
— max-bandwidth mbps
—no max-bandwidth
— min-bandwidth mbps
—no min-bandwidth
— [no] monitor-bandwidth
— multipliers sample-multiplier num1 adjust-multiplier num2
—no multipliers
— overflow-limit number threshold percent [bw mbps]
—no overflow-limit
— underflow-limit number threshold percent [
bw mbps]
—no underflow-limit
— [no] bgp-shortcut
— bgp-transport-tunnel include | exclude
— class-type ct-number
—no class-type
— [no] cspf [use-te-metric]
— dest-global-id dest-global-id
—no dest-global-id
— dest-tunnel-number dest-tunnel-number
—no dest-tunnel-number
— [no] egress-statistics
— accounting-policy policy-id
—no accounting-policy
— [no] collect-stats
— [no] shutdown
— [no] exclude group-name [group-name...(up to 5 max)]
— [no] exclude-node ip-address
— fast-reroute frr-method
—no fast-reroute
— [no] propagate-admin-group
— bandwidth rate-in-mbps
—no bandwidth
— hop-limit number
—no
hop-limit
— [no] node-protect
— from ip-address
— hop-limit number
—no hop-limit
— igp-shortcut [lfa-protect | lfa-only] [relative-metric [offset]]
— [no] igp-shortcut
— [no] include group-name [group-name...(up to 5 max)]
To Next Page