MPLS and RSVP
7450 ESS MPLS Guide Page 187
Modifying an MPLS LSP
Some MPLS LSP parameters such as primary and secondary, must be shut down before they
can be edited or deleted from the configuration.
The following displays a MPLS LSP configuration example. Refer to the LSP configuration
on page 179.
A:ALA-1>>config>router>mpls>lsp# info
----------------------------------------------
shutdown
to 10.10.10.104
from 10.10.10.103
rsvp-resv-style ff
include "red"
exclude "green"
fast-reroute one-to-one
exit
primary "to-NYC"
hop-limit 50
exit
secondary "secondary-path"
exit
----------------------------------------------
A:ALA-1>config>router>mpls#
To Next Page
Loading...
