7450 ESS MPLS Guide Page 19
GETTING STARTED
In This Chapter
This chapter provides process flow information to configure MPLS, RSVP, GMPLS, and LDP
protocols.
Alcatel-Lucent Router Configuration Process
Table 1 lists the tasks necessary to configure MPLS applications functions.
This guide is presented in an overall logical configuration flow. Each section describes a software
area and provides CLI syntax and command usage to configure parameters for a functional area.
Note: In SR OS 12.0.R4 any function that displays an IPv6 address or prefix changes to reflect
rules described in RFC 5952, A Recommendation for IPv6 Address Text Representation.
Specifically, hexadecimal letters in IPv6 addresses are now represented in lowercase, and the
correct compression of all leading zeros is displayed. This changes visible display output
Table 1: Configuration Process
Area Task Chapter
Protocol configuration Configure MPLS protocols:
• MPLS MPLS on page 23
• RSVP RSVP on page 42
• GMPLS GMPLS on page 421
• LDP Label Distribution Protocol on page 518
Reference List of IEEE, IETF, and other
proprietary entities.
To Next Page
Loading...
