Alcatel-Lucent 7450 - Show Commands; Tools Commands

MPLS and RSVP
7450 ESS MPLS Guide Page 203
Show Commands
show
— router
—mpls
— bypass-tunnel [to ip-address] [protected-lsp name] [dynamic | manual| p2mp]
[detail]
— interface [ip-int-name|ip-address] [label-map label]
— interface [ip-int-name|ip-address] statistics
— label start-label [end-label | in-use | owner]
— label-range
— lsp [lsp-name] [status {up|down}] [from ip-address| to ip-address] [detail]
— lsp {transit | terminate} [status {up|down}] [from ip-address | to
ip-address | lsp-
name name] [detail]
— lsp count
— lsp lsp-name activepath
— lsp [lsp-name] path [path-name] [status {up | down}] [detail]
— lsp [lsp-name] path [path-name] mbb
—
—
— p2mp-info [type {originate|transit|terminate}] [s2l-endpoint ip-address]
— p2mp-lsp [lsp-name] [detail]
— p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] [mbb]
— p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-
to-address]][status {up | down}] [detail]
— p2mp-lsp [lsp-name] p2mp-instance [p2mp-instance-name] s2l [s2l-name [to s2l-
to-address]] mbb
— srlg-database [router-id ip-address] [interface ip-address]
— srlg-group
[group-name]
— static-lsp [lsp-name]
— static-lsp {transit | terminate}
— static-lsp count
— statistics-summary
— status
— tp-lsp [lsp-name] [status {up | down}] [from ip-address | to ip-address] [detail]
— tp-lsp [lsp-name] path [protecting | working] [detail]
— tp-lsp [lsp-name] protection
show
— router
—rsvp
— interface [interface [ip-int-name]] statistics [detail]
— neighbor [ip-address] [detail]
— session [session-type] [from ip-address| to ip-address| lsp-name name] [
status
{up|down}][detail]
— statistics
— status
Tools Commands
tools
—dump
— router