Alcatel-Lucent 7450 - Page 345

MPLS and RSVP
7450 ESS MPLS Guide Page 345
p2mp-info
Syntax p2mp-info [type {originate | transit | terminate}] [s2l-endpoint ip-address]
Context show>router>mpls
Description This command displays P2MP cross-connect information.
Parameters type — Specifies the P2MP type.
Values originate — Specifies to display the static LSPs that originate at this virtual router.
transit — Specifies to display the static LSPs that transit through this virtual router.
terminate — Specifies to display the static LSPs that terminate at this virtual
router.
Sample Output
*A:Dut-C# show router mpls p2mp-info
========================================================================
MPLS P2MP Cross Connect Information
========================================================================
------------------------------------------------------------------------
S2L ipmsi-4000-73729::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.1 Tunnel ID : 61441
P2MP ID : 4000 Lsp ID : 29696
S2L Name : ipmsi-4000-73729::pa* To : 10.20.1.3
In Interface : 1/1/1 In Label : 262129
Num. of S2ls : 1
------------------------------------------------------------------------
S2L ipmsi-65535-73730::path_ipmsi
------------------------------------------------------------------------
Source IP Address : 10.20.1.1 Tunnel ID : 61442
P2MP ID : 65535 Lsp ID : 30208
S2L Name : ipmsi-65535-73730::p* To : 10.20.1.3
In Interface : 1/1/1 In Label : 262128
Num. of S2ls : 1