Show Commands
Page 794 7450 ESS MPLS Guide
Clear Commands
fec-egress-statistics
Syntax fec-egress-statistics [ip-prefix/mask]
Context clear>router>ldp
Description This command clears LDP FEC egress statistics..
ip-prefix — Specify information for the specified IP prefix and mask length. Host bits must be 0.
mask — Specifies the 32-bit address mask used to indicate the bits of an IP address that are being
used for the subnet address.
Values 0 — 32
instance
Syntax instance
Context clear>router>ldp
Description This command resets the LDP instance.
interface
Syntax interface [ip-int-name]
Context clear>router>ldp
Description This command restarts or clears statistics for LDP interfaces.
Parameters ip-int-name — The name of an existing interface. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
family — Specifies to clear IPv4 or IPv6 information.
Sample Output
*A:Dut-A# clear router ldp interface "ip-10.10.1.1" ipv4
*A:Dut-A#
*A:Dut-A# clear router ldp interface "ip-10.10.1.1" ipv6
*A:Dut-A#
To Next Page
Loading...
