Alcatel-Lucent 7450 - MPLS;RSVP Command Reference; Command Hierarchies; MPLS Commands

MPLS and RSVP
7450 ESS MPLS Guide Page 193
MPLS/RSVP Command Reference
Command Hierarchies
• MPLS Commands on page 193
• MPLS Path Commands on page 200
• LSP Commands on page 197
• RSVP Commands on page 201
• Show Commands on page 203
• Tools Commands on page 203
• Clear Commands on page 205
• Debug Commands on page 205
MPLS Commands
config
— router
— [no] mpls
—[no] admin-group-frr
— auto-bandwidth-multipliers sample-multiplier number1 adjust-multiplier num-
ber2
—no auto-bandwidth-multipliers
— auto-lsp lsp-template template-name {policy peer-prefix-policy [peer-prefix-pol-
icy...(upto 5 max)] | one-hop}
— no auto-lsp lsp-template template-name
— bypass-resignal-timer minutes
—no bypass-resignal-timer
— [no] cspf-on-loose-hop
— dynamic-bypass [enable | disable]
— exponential-backoff-retry
— [no] frr-object
— hold-timer seconds
—no hold-timer
— ingress-statistics
— [no] lsp lsp-name sender ip-address
— accounting-policy policy-id
—no accounting-policy
— [
no] collect-stats
— [no] shutdown
— [no] p2p-template-lsp rsvp-session-name SessionNameString sender
sender-address
— accounting-policy policy-id
—no accounting-policy
— [no] collect-stats