Alcatel-Lucent 7450 - Page 208

MPLS Commands
Page 208 7450 ESS MPLS Guide
MPLS Commands
mpls
Syntax [no] mpls
Context config>router
Description This command enables the context to configure MPLS parameters. MPLS is not enabled by default
and must be explicitely enabled (no shutdown). The shutdown command administratively disables
MPLS.
The no form of this command deletes this MPLS protocol instance; this will remove all configuration
parameters for this MPLS instance.
MPLS must be shutdown and all SDP bindings to LSPs removed before the MPLS instance can be
deleted. If MPLS is not shutdown, when the no mpls command is executed, a warning message on
the console displays indicating that MPLS is still administratively up.
accounting-policy
Syntax accounting-policy acct-policy-id
no accounting-policy
Context config>router>mpls>ingr-stats
config>router>mpls>lsp>egr-stats
config>router>mpls>lsp-template>egr-stats
Description This command associates an accounting policy to the MPLS instance.
An accounting policy must be defined before it can be associated else an error message is generated.
The no form of this command removes the accounting policy association.
Default none
Parameters acct-policy-id — Enter the accounting policy-id as configured in the config>log>accounting-policy
context.
Values 1 — 99
collect-stats
Syntax [no] collect-stats
Context config>router>mpls>ingr-stats
config>router>mpls>lsp>egr-stats