EasyManua.ls Logo

Alcatel-Lucent 7450 - ECMP Considerations; LDP FRR and LDP Shortcut

Alcatel-Lucent 7450
816 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LDP FRR Procedures
Page 556 7450 ESS MPLS Guide
session goes also down. In this case, LDP sends a neighbor/next-hop down message to the
IOM for this LDP peer only.
5. A BFD session enabled on the LDP interface to a directly connected peer, times-out and
brings down the link LDP session to this peer. In this case, LDP sends a neighbor/next-hop
down message to the IOM for this LDP peer only. BFD support on LDP interfaces is a
new feature introduced for faster tracking of link LDP peers. See Section 1.2.1 for more
details.
The tunnel-down-dump-time option or the label-withdrawal-delay option, when enabled, does not
cause the corresponding timer to be activated for a FEC as long as a backup NHLFE is still
available.
ECMP Considerations
Whenever the SPF computation determined there is more than one primary next-hop for a prefix, it
will not program any LFA next-hop in RTM. Thus, the LDP FEC will resolve to the multiple
primary next-hops in this case which provides the required protection.
Also note that when the system ECMP value is set to ecmp=1 or to no ecmp, which translates to
the same and is the default value, SPF will be able to use the overflow ECMP links as LFA next-
hops in these two cases.
LDP FRR and LDP Shortcut

Table of Contents

Other manuals for Alcatel-Lucent 7450

Related product manuals