Alcatel-Lucent 7450 - MPLS Path Commands

Command Hierarchies
Page 200 7450 ESS MPLS Guide
—no fc
— max-bandwidth mbps
—no max-bandwidth
— min-bandwidth mbps
—no min-bandwidth
— [no] monitor-bandwidth
— multipliers sample-multiplier num1 adjust-multiplier num2
—no multipliers
— overflow-limit number threshold percent [bw mbps]
—no overflow-limit
— underflow-limit number threshold percent [bw mbps]
—no underflow-limit
— [no] egress-statistics
— accounting-policy policy-id
—no accounting-policy
— [no] collect-stats
— [no] exclude-node ip-address
— fast-reroute frr-method
—no fast-reroute
— [no] propagate-admin-group
— bandwidth rate-in-mbps
—no bandwidth
— hop-limit number
—no hop-limit
— [
no] node-protect
— from ip-address
— hop-limit number
—no hop-limit
— igp-shortcut [lfa-protect | lfa-only] [relative-metric [offset]]
— [no] igp-shortcut
— [no] include group-name [group-name...(up to 5 max)]
— ldp-over-rsvp [include | exclude]
— [no] least-fill
— load-balancing-weight integer (32-bit)
—no load-balancing-weight
— [no] metric metric
— [no] propagate-admin-group
— retry-limit number
—no retry-limit
— retry-timer seconds
—no retry-timer
— rsvp-resv-style [se | ff]
— vprn-auto-bind [include | exclude]
MPLS Path Commands
config
— router
— [no] mpls
— [no] path path-name
— hop hop-index ip-address {strict | loose}
—no hop hop-index
— [no] shutdown
— [no] static-lsp lsp-name
— push label nexthop ip-address