MPLS and RSVP
7450 ESS MPLS Guide Page 199
—no out-label
— protection-template name
—no protection-template
— [no] shutdown
— retry-limit number
—no retry-limit
— retry-timer seconds
—no retry-timer
—[no] revert-timer timer-value
— rsvp-resv-style [se | ff]
— [no] secondary path-name
— [no] adaptive
— bandwidth rate-in-mbps
—no bandwidth
— class-type ct-number
—no class-type
— [no] exclude group-name [group-name...(up to 5 max)]
— hop-limit number
—no hop-limit
— [no] include group-name [group-name...(up to 5 max)]
— [no] path-preference preference-number
— priority setup-priority hold-priority
—no
priority
— [no] record
— [no] record-label
— [no] shutdown
— [no] srlg
— [no] standby
— [no] shutdown
— to [ip-address | node-id [a.b.c.d. | 1...4,294,967,295]]
— vprn-auto-bind [include | exclude]
— [no] working-tp-path
— bfd-enable [cc | cc_cv]
—no bfd-enable
— in-label in-label
—no in-label
— lsp-num lsp-num
—no lsp-num
— [no] mep
— dsmap if-num
—no dsmap
— oam-template name
—no oam-template
— out-label out-label out-link if-name
[next-hop ip-address]
—no out-label
— [no] shutdown
— lsp-template template-name [p2mp | one-hop-p2p | mesh-p2p]
—no lsp-template template-name
— [no] adspec
— [no] auto-bandwidth
— adjust-down percent [bw mbps]
—no adjust-down
— adjust-up percent [bw mbps]
—no adjust-up
— fc fc-name sampling-weight sampling-weight
To Next Page
Loading...
