Command Hierarchies
Page 198 7450 ESS MPLS Guide
— ldp-over-rsvp [include | exclude]
— [no] least-fill
— [no] ldp-over-rsvp [include | exclude]
— load-balancing-weight integer (32-bit)
—no load-balancing-weight
— main-ct-retry-limit number
—no main-ct-retry-limit
— [no] metric metric
— p2mp-id id
— [no] primary path-name
— [no] adaptive
— backup-class-type ct-number
—no backup-class-type
— bandwidth rate-in-mpbs
—no bandwidth
— class-type ct-number
—no class-type
— [no] exclude group-name [group-name...(up to 5 max)]
— hop-limit number
—no hop-limit
— [no] include group-name [
group-name...(up to 5 max)]
— priority setup-priority hold-priority
—no priority
— [no] record
— [no] record-label
— [no] shutdown
— [no] primary-p2mp-instance instance-name
— [no] adaptive
— bandwidth rate-in-mbps
—no bandwidth
— [no] exclude group-name [group-name...(up to 5 max)]
— [no] hop-limit
— hop-limit number
—no hop-limit
— [no] include group-name [group-name...(up to 5 max)]
— [no] record
— [no] record-label
— [no] s2l-path path-name to
ip-address
— [no] shutdown
— [no] shutdown
— [no] propagate-admin-group
— [no] protect-tp-path
— bfd-enable [cc | cc_cv]
—no bfd-enable
— [no] mep
— dsmap if-num
—no dsmap
— in-label in-label
—no in-label
— lsp-num lsp-num
—no lsp-num
— [no] mep
— oam-template name
—no oam-template
— out-label out-label out-link if-name [next-hop ip-address]
To Next Page