Deleting an MPLS Interface
Page 190 7450 ESS MPLS Guide
Deleting an MPLS Interface
In order to delete an interface from the MPLS configuration, the interface must be shut down
first.
Use the following CLI syntax to delete an interface from the MPLS configuration:
CLI Syntax: mpls
[no] interface ip-int-name
shutdown
ALA-1>config>router>if-attr# info
----------------------------------------------
admin-group "green" value 15
admin-group "yellow" value 20
admin-group "red" value 25
----------------------------------------------
A:ALA-1>config>router>mpls# info
----------------------------------------------
...
interface "system"
exit
no shutdown
----------------------------------------------
A:ALA-1>config>router>mpls#
To Next Page
Loading...
