LDP
7450 ESS MPLS Guide Page 795
resource-failures
Syntax resource-failures
Context clear>router>ldp
Description This command clears resource overload status in the LDP instance.
peer
Syntax peer [ip-address] [statistics]
Context clear>router>ldp
Description This command restarts or clears statistics for LDP targeted peers.
Parameters ip-address — The IP address of a targeted peer.
statistics — Clears only the statistics for a targeted peer
session
Syntax session ip-addr[label-space] [statistics]
session ip-addr[label-space] overload [fec-type p2mp|prefixes sub-type sub-type]
session ip-addr[label-space] overload [fec-type svc-fec128|svc-fec129]
Context clear>router>ldp
Description This command restarts or clears statistics for LDP sessions.
Parameters ip-address — Clears the IP address of the session. — label-space
Specifies the label space identifier that the router is advertising on the interface.
Values 0 — 65535
statistics — Clears only the statistics for a session.
overload — Clears overload information.
fec-type — Clears the specified FEC type.
Values p2mp, svc-fec128, svc-fec129
session ip-addr[label-space] — Specifies the IP address and label space identifier.
Values <ip-addr[label-spa*> : ipv4-address:label-space
ipv6-address[label-space]
label-space - [0..65535]
To Next Page
Loading...
