Page 394 7450 ESS MPLS Guide
RSVP Global Statistics
===============================================================================
PATH Timeouts : 1026 RESV Timeouts : 182
===============================================================================
*A:SRU4>show>router>rsvp#
status
Syntax rsvp status
Context show>router>rsvp
Description This command displays RSVP status.
Output RSVP Status — The following table describes RSVP status output fields.
Label Description
Admin Status
Down — RSVP is administratively disabled.
Up — RSVP is administratively enabled.
Oper Status
Down — RSVP is operationally down.
Up — RSVP is operationally up.
Keep Multiplier
Displays the keep-multiplier number used by RSVP to declare that a
reservation is down or the neighbor is down.
Refresh Time
Displays the refresh-time interval, in seconds, between the successive
Path and Resv refresh messages.
Message Pacing
Enabled — RSVP messages, specified in the max-burst command,
are sent in a configured interval, specified in the period command.
Disabled — Message pacing is disabled. RSVP message transmis-
sion is not regulated.
Pacing Period
Displays the time interval, in milliseconds, when the router can send
the specified number of RSVP messages specified in the rsvp max-
burst command.
Max Packet Burst
Displays the maximum number of RSVP messages that are sent in the
specified period under normal operating conditions.
Soft Preemption
Timer
Displays the time, in seconds, a node holds on to a reservation for
which it has triggered the soft preemption procedure.
Rapid Retransmit
Displays the value of the rapid retransmission interval.
Rapid Retry Limit
Displays the rapid retry limit.
Graceful Shutdown
Specifies whether graceful shutdown of the RSVP node is enabled.
To Next Page
Loading...
