Alcatel-Lucent 7450 - Page 387

MPLS and RSVP
7450 ESS MPLS Guide Page 387
10.11.102.2 e13c2_2 Up 1d 00:52:56 LR RR LD RM
10.11.103.3 e13s1_1 Up 1d 00:52:54 LR RR LD RM
LG
10.11.104.3 e13s1_2 Up 1d 00:52:56
10.11.105.4 e13s2_1 Up 1d 00:52:56
10.11.106.4 e13s2_2 Up 1d 00:52:56
------------------------------------------------------------------------
Neighbors : 6
session
Syntax session session-type [from ip-address | to ip-address| lsp-name name] [status {up |
down}] [detail]
Context show>router>rsvp
Description This command shows RSVP session information.
Parameters session session-type — Specifies the session type.
Values originate, transit, terminate, detour, detour-transit, detour-terminate, bypass-tunnel
from ip-address — Specifies the IP address of the originating router.
to ip-address — Specifies the IP address of the egress router.
lsp-name name — Specifies the name of the LSP used in the path.
status up — Specifies to display a session that is operationally up.
status down — Specifies to display a session that is operationally down.
detail — Displays detailed information.
Output RSVP Session Output — The following table describers RSVP session output fields.
Sample Output
*A:SRU4>show>router>rsvp# session
Label Description
From
The IP address of the originating router.
To
The IP address of the egress router.
Tunnel ID
The IP address of the tunnel’s ingress node supporting this RSVP ses-
sion.
LSP ID
The ID assigned by the agent to this RSVP session.
Name
The administrative name assigned to the RSVP session by the agent.
State
Down — The operational state of this RSVP session is down.
Up — The operational state of this RSVP session is up.