Alcatel-Lucent 7450 - Page 349

MPLS and RSVP
7450 ESS MPLS Guide Page 349
Parameters lsp-name — Specifies the name of the LSP used in the path.
p2mp-instance[p2mp-instance-name — Specifies the administrative name for the P2MP instance
which must be unique within a virtual router instance.
mbb — Specifies to display make-before-break (MBB) information.
s2l — Specifies the source-to-leaf (S2L) name.
to s2l-to-address —
status — Displays the status of the p2mp LSP.
Values up — Displays the total time that this S2l has been operational.
down — Displays the total time that this S2l has not been operational.
Sample Output
*A:Dut-C# show router mpls p2mp-lsp
- p2mp-lsp [<lsp-name>] [detail]
- p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] [mbb]
- p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] s2l [<s2l-name>
[to <s2l-to-address>]][status {up|down}] [detail]
- p2mp-lsp [<lsp-name>] p2mp-instance [<p2mp-instance-name>] s2l [<s2l-name>
[to <s2l-to-address>]] <mbb>
- p2mp-lsp using-template [lsp-template <template-name>] [detail]
<lsp-name> : [64 chars max] - accepts * as wildcard char
<p2mp-instance> : keyword
<p2mp-instance-name> : [max 32 chars]
<s2l> : keyword
<s2l-name> : [max 32 chars]
<up|down> : keywords
<detail> : keyword
<mbb> : keyword
<s2l-to-address> : [a.b.c.d]
<using-template> : keyword
<lsp-template> : [32 chars max]