Page 504 7450 ESS MPLS Guide
memId 2: (Up/Up), session: 1::empty, reg: Y
Work: 1/2/1 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:14.720), rsrcAdded Y
memId 3: (Up/Up), session: 2::empty, reg: Y
Work: 1/2/2 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:23.650), rsrcAdded Y
memId 4: (Up/Up), session: 3::empty, reg: Y
Work: 1/1/14 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:10:05.880), rsrcAdded Y
memId 5: (Up/Up), session: 4::empty, reg: Y
Work: 1/1/13 (Up), status: Up, Cnt(Up/Dn/PortChg): 1/0/1
lspState Up, lspUpd: 1 (000 01:09:50.710), rsrcAdded Y
Sorted list of 4 member port(s):
1/1/13 1/1/14 1/2/1 1/2/2
peer
Syntax peer peer-node-id
Context tools>dump>router>lmp
Description This command dumps information about a specific LMP peer.
Parameters peer-node-id — An identifier for the LMP peer node. This may be an IPv4-formatted address or a 32-
bit unsigned integer.
Values a.b.c.d | 1 — 4294967295
control-channel
Syntax control-channel lmp-cc-id
Context tools>dump>router>lmp>peer
Description This command dumps information about a control channel of an LMP peer.
Parameters lmp-cc-id — An unsigned integer identifier for the control channel.
Values 1 — 42949672
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21
10.27.255.213 10.27.255.219
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21 control-channel 7001
MINOR: CLI peer 10.27.255.21 is not configured.
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.21
10.27.255.213 10.27.255.219
*A:Dut-B-UNI-C>tools>dump>router>lmp# peer 10.27.255.213 control-channel
<lmp-cc-id>
7001
To Next Page
Loading...
