Page 506 7450 ESS MPLS Guide
LastEvt: ackRxSm (000 16:19:18.070), Now: 000 16:19:33.270
LastRxLkSum: Id 1010701, dbCnt 1, ErrCode 0x0, Flags: 0x0
RxDb: Id(L/R) 101070117/101070117, Flags: 0x3
SubObj: type/len/sw/enc: 1/12/125/2, Kbps(Min/Max): 10000000/10000000
LastRxLkSumNack: msgId 0, dbCnt 0, ErrCode 0x0, Flags: 0x0
Db Links:
1010701-101070117 (1/1/13): State Up/UpAlloc, port Up/Up RemoteId: 101070117,
Alloc Y, bw 10000000, portBw 10000000/10000000, tunGrp 1, cfg: Y, Lpc: Y
Alloc (Cnt/Tm): 3/000 10:16:21.770, Free 2/000 10:15:32.050
Cnt(Up/Dn): 1/0, UpDnTm: 000 00:10:55.310
lsp
Syntax lsp [lsp-name] [detail]
Context tools>dump>router>gmpls
Description This command dumps information about LSPs. Configuring the lsp-name parameter will only dump
information about the specified LSP.
Parameters lsp-name — The name of the LSP. 32 characters max.
detail — Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1"
LSP "D1", LspIndex: 1, Type: GMPLS-UNI, AdminState: UP, OperState: UP, Flags:
0x0
Total LSP Count: 1
*A:Dut-B-UNI-C>tools>dump>router>gmpls# lsp "D1" detail
=================================================================================
LSP "D1", LspIndex: 1
Type: GMPLS-UNI, AdminState: UP, OperState: UP, Flags: 0x0
LastChange: 02/04/2015 23:30:34
TimeSinceLastOperChange: 0d 15:07:19
NumWorkingPaths: 1, NumProtectPaths: 0
NumWorkingPathsUp: 1, NumProtectPathsUp: 0
----------------------------------------------------------------------------------
LspPath PathIndex: 2, Type: Working
AdminState: UP, OperState:Up, Flags: 0x0
LastChange: 02/04/2015 23:30:34
TimeSinceLastOperChange: 0d 15:07:19
LspId: 296, SessionName: D1::2
CurrState: LSP_PATH_UP, PrevState: LSP_PATH_INIT
RetryCount: 107, FailNode: 0.0.0.0, FailCode: none
Peer: 0.0.0.0
PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 -
296)
Actual Hops:
Hop 1 : Unnumbered RouterId 52.52.52.52, InterfaceId 1010702
UpStreamLabel 0, DnStreamLabel 101070217, Flags 0x0