GMPLS
7450 ESS MPLS Guide Page 511
PSB: vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62 -
871)
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: C1::3 Sender: 0.0.0.0"
TunnelGrpId: 3 MemberId: 1 Mode:LoadSharing
cfgFarEnd: 62.62.62.62 Flags: 0x0 NumUpdSent: 12 NumSrlgChng: 3
PSB: vrId: 1 Session (To: 62.62.62.62 - 2 - 52.52.52.52), Sender (52.52.52.52 -
297)
SRLG Collected :-
SRLG 27
SRLG 5
SRLG 27
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
LspPort "vrId: 1 Type: 0 Session: D1::2 Sender: 0.0.0.0"
TunnelGrpId: 2 MemberId: 2 Mode:LoadSharing
cfgFarEnd: 72.72.72.72 Flags: 0x0 NumUpdSent: 10 NumSrlgChng: 0
PSB: vrId: 1 Session (To: 72.72.72.72 - 1 - 52.52.52.52), Sender (52.52.52.52 -
296)
SRLG Collected :-
SRLG 27
SRLG 4
SRLG 27
----------------------------------------------------------------------------------
Total Port Count: 6
psb
Syntax psb [tunnelid tunnel-id] [lspid lsp-id] [detail]
Context tools>dump>router>gmpls
Description This command dumps information about a PSB.
Parameters tunnel-id — The identifier of the tunnel.
Values 0 — 4294967295
lsp-id — The identifier of the LSP.
Values 1 — 65535
detail — Keyword to output information in greater detail.
Sample Output
*A:Dut-B-UNI-C>tools>dump>router>gmpls# psb
PSB:
vrId: 1 Session (To: 42.42.42.42 - 3 - 52.52.52.52), Sender (52.52.52.52 - 299)
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 52.52.52.52 - 1 - 42.42.42.42), Sender (42.42.42.42 - 46)
--------------------------------------------------------------------------------
PSB:
vrId: 1 Session (To: 52.52.52.52 - 3 - 62.62.62.62), Sender (62.62.62.62 - 871)
--------------------------------------------------------------------------------