Alcatel-Lucent 7450 - Page 632

LDP Signaling and Services
Page 632 7450 ESS MPLS Guide
The following shows a working configuration of LDP over RSVP-TE (1) where tunnels look like
the second example (2):
1. *A:ALA-1>config>router>ldp# info
----------------------------------------------
prefer-tunnel-in-tunnel
interface-parameters
interface "port-1/1/3"
exit
interface "port-lag-1"
exit
exit
targeted-session
peer 10.51.0.1
shutdown
tunneling
lsp "to_P_1"
exit
exit
peer 10.51.0.17
shutdown
tunneling
lsp "to_P_6"
exit
exit
exit
----------------------------------------------
*A:ALA-1>config>router>ldp#
2. ALA-1>config>router>if-attr# info
----------------------------------------------
admin-group "lower" value 2
admin-group "upper" value 1
----------------------------------------------
*A:ALA-1>config>router>mpls# info
----------------------------------------------
resignal-timer 30
interface "system"
exit
interface "port-1/1/3"
exit
interface "port-lag-1"
exit
path "dyn"
no shutdown
exit
lsp "to_P_1"
to 10.51.0.1
cspf
fast-reroute facility
exit
primary "dyn"
exit
no shutdown
exit