Generic Commands
7450 ESS MPLS Guide Page 655
maximum-recovery-time
Syntax maximum-recovery-time interval
no maximum-recovery-time
Context config>router>ldp>graceful-restart
Description This command configures the local maximum recovery time.
The no form of the command returns the default value.
Default 120
Parameters interval — Specifies the length of time in seconds.
Values 15 — 1800
neighbor-liveness-time
Syntax neighbor-liveness-time interval
no neighbor-liveness-time
Context config>router>ldp>graceful-restart
Description This command configures the neighbor liveness time.
The no form of the command returns the default value.
Default 120
Parameters interval — Specifies the length of time in seconds.
Values 5 — 300
import
Syntax import policy-name [policy-name …up to 5 max]
no import
Context config>router>ldp
Description This command configures import route policies to determine which label bindings (FECs) are
accepted from LDP neighbors. Policies are configured in the config>router>policy-options context.
If no import policy is specified, LDP accepts all label bindings from configured LDP neighbors.
Import policies can be used to limit or modify the routes accepted and their corresponding parameters
and metrics.
If multiple policy names are specified, the policies are evaluated in the order they are specified. The
first policy that matches is applied. If multiple import commands are issued, the last command
entered will override the previous command. A maximum of five policy names can be specified.
To Next Page
Loading...
