Page 662 7450 ESS MPLS Guide
Interface Parameters Commands
interface-parameters
Syntax interface-parameters
Context config>router>ldp
Description This command enables the context to configure LDP interfaces and parameters applied to LDP
interfaces. The user can configure different default parameters for IPv4 and IPv6 LDP interfaces by
entering ipv4 or ipv6 as the next command.
ipv4
Syntax ipv4
Context config>router>ldp>interface parameters
This command enables the context to configure LDP interfaces and parameters applied to an IPv4
LDP interface.
ipv6
Syntax ipv6
Context config>router>ldp>interface parameters
Description This command enables the context to configure LDP interfaces and parameters applied to an IPv6
LDP interface.
To Next Page
Loading...
