Page 682 7450 ESS MPLS Guide
Policies are configured in the config>router>policy-options context. A maximum of five policy
names can be specified.
The no form of the command removes the policy from the configuration.
Parameters policy-name — The export policy name. Allowed values are any string up to 32 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
import-prefixes
Syntax import-prefixes policy-name [policy-name...(up to 5 max)]
no import-prefixes
Context config>router>ldp>targeted-session
Description This command configures the import route policy to determine which FEC prefix label bindings are
accepted from targeted LDP neighbors into this node. A label binding that is filtered out (deny) will
not be imported. A route that is filtered in (accept) will be imported.
If no import policy is specified, this node session will accept all bindings from configured targeted
LDP neighbors. This policy is applied in addition to the global LDP policy.
Policies are configured in the config>router>policy-options context. A maximum of five policy
names can be specified.
The no form of the command removes the policy from the configuration.
Parameters policy-name — The import policy name. Allowed values are any string up to 32 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
To Next Page
Loading...
