LDP
7450 ESS MPLS Guide Page 709
active
Syntax active detail [family] [egress-lsp tunnel-id]
active detail [egress-nh ip-address] [family]
active egress-if port-id [summary|detail] [family]
active egress-lsp tunnel-id [summary|detail] [family]
active egress-nh [family] [summary|detail] ip-address
active ipv4 [summary|detail] [egress-if port-id]
active ipv4 [summary|detail] [egress-lsp tunnel-id]
active ipv4 [summary|detail] [egress-nh ip-address]
active ipv6 [summary|detail] [egress-if port-id]
active ipv6 [summary|detail] [egress-nh ip-address]
active ipv6 [summary|detail] [egress-lsp tunnel-id]
active p2mp p2mp-id identifier root ip-address [summary|detail] [egress-if port-id]
active p2mp p2mp-id identifier root ip-address [summary|detail] [egress-lsp tunnel-id]
active p2mp p2mp-id identifier root ip-address [summary|detail] [egress-nh ip-address]
active p2mp [family] [summary|detail] [egress-if port-id] [opaque-type opaque-type]
active p2mp [family] [summary|detail] [egress-lsp tunnel-id] [opaque-type opaque-type]
active p2mp [family] [
summary|detail] [egress-nh ip-address] [opaque-type opaque-
type]
active p2mp source ip-address group mcast-address root ip-address [rd rd]
[summary|detail] [egress-if port-id]
active p2mp source ip-address group mcast-address root ip-address [rd rd]
[summary|detail] [egress-lsp tunnel-id]
active p2mp source ip-address group mcast-address root ip-address [rd rd]
[summary|detail] [egress-nh ip-address]
active prefixes [family] [summary|detail] [egress-if port-id]
active prefixes
[family] [summary|detail] [egress-lsp tunnel-id]
active prefixes [egress-nh ip-address] [family] [summary|detail]
active prefixes prefix ip-prefix/ip-prefix-length [summary|detail] [egress-if port-id]
active prefixes prefix ip-prefix/ip-prefix-length [summary|detail] [egress-lsp tunnel-id]
active prefixes prefix ip-prefix/ip-prefix-length [egress-nh ip-address] [summary|detail]
active summary [family] [egress-if port-id]
active summary [family] [egress-lsp tunnel-id]
active summary [egress-nh ip-address] [family]
Context show>router>ldp>bindings
Description This command display information about LDP active bindings.
Parameters detail — Displays detailed information.
summary — Displays information in a summarized format.
family — Displays either IPv4 or IPv6 active LDP information.
opaque-type opaque-type — Specifies the type of a Multi-Point Opaque Value Element.
Values generic, ssm, vpn-ssm
egress-lsp tunnel-id — Specifies the tunnel identifier for this egress LSP.
Values 0 — 4294967295
To Next Page
Loading...
