Alcatel-Lucent 7450 - Page 799

LDP
7450 ESS MPLS Guide Page 799
packet
Syntax packet [detail]
no packet
Context debug>router>ldp>if
debug>router>ldp>peer
Description This command enables debugging for specific LDP packets.
The no form of the command disables the debugging output.
Parameters detail — Displays detailed information.
hello
Syntax hello [detail]
no hello
Context debug>router>ldp>if>packet
debug>router>ldp>peer>packet
Description This command enables debugging for LDP hello packets.
The no form of the command disables the debugging output.
Parameters detail — Displays detailed information.
init
Syntax init [detail]
no init
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP Init packets.
The no form of the command disables the debugging output.
Parameters detail — Displays detailed information.
keepalive
Syntax [no] keepalive
Context debug>router>ldp>peer>packet
Description This command enables debugging for LDP Keepalive packets.
The no form of the command disables the debugging output.