Allen-Bradley MicroLogix 1400 User Manual

Rockwell Automation Publication 1766-UM001I-EN-P - June 2015 259
MicroLogix 1400 Distributed Network Protocol (DNP3) Appendix F
For the MicroLogix 1400 Series B controllers:
Each of the data files for a DNP3 Object will have a file number in the user
memory as shown below. You can configure the Data file number for each DNP3
Object in the DNP3 Slave tab of the DNP3 Slave Application Layer
Configuration. File types for this object file can be Binary, Integer, Long, or Float
data files.
The file numbers for each DNP3 Object cannot be in conflict with each other.

Allen-Bradley MicroLogix 1400 Specifications

General

Processor	32-bit
Expansion Modules	Up to 7 expansion I/O modules
Power Supply	24V DC or 120/240V AC
Programming Software	RSLogix 500
Communication Ports	Ethernet, RS-232/RS-485 combo port
Controller Type	Programmable Logic Controller (PLC)
Series	MicroLogix
Digital Outputs	12
Analog Inputs	6 (embedded)
Analog Outputs	2 (embedded)
High-Speed Counter	6 high-speed counters
Pulse Output	2 (embedded)
Ethernet Port	Yes