Publication 1766-RM001A-EN-P - October 2008
Communications Instructions 453
DHRIO Routing table creation
Go to the routing table configuration tab. Right-click on the DHRIO
channel being used and select Add Module. Select the DH+ Bridge. Enter
the DH+ node number of the KA5 (37 in this example), and the Link ID of
the DH485 (13 in this example). Click Apply.
You can now browse through the KA5 module from RSWho.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
