Allen-Bradley PanelView Plus 7 - Export the HMI Tag Database

100 Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018
Chapter 9 Optimize Runtime Performance
The TCW does not add the L parameter to alarm trigger tags. See page 12 for
details on converting alarm trigger tags to direct reference.
Export the HMI Tag Database
Follow these pre-conversion steps to export the HMI tag database in your
migrated application.
1. Launch FactoryTalk View Studio software.
2. Select your ME application and click Open.
This example selects Baggage_800x600.
1