74 Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018
Chapter 7 Qualify the Runtime Application
Configure Communication
You are now ready to configure communication for your imported application.
Because this application is a new application, a communication configuration
does not exist. The configuration varies depending on the communication
protocol you use.
Follow these steps to configure communication for your application.
1. In the Explorer window, expand RSLinx® Enterprise and double-click
Communication Setup.
2. Select Create a New Configuration and click Finish.
3. In the Communication Setup dialog box, select the Local tab.
This communication path is used for testing individual displays and Test
Application.
To Next Page
Loading...
