Allen-Bradley PanelView Plus 7 Migration Guide

54 Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018
Chapter 4 Review the Application Conversion Log
About the Conversion Log
The application conversion log, convert.log, is generated by the import wizard
when you import your PanelBuilder32 application into FactoryTalk View ME
software. This log provides detailed information about objects or features that
did not convert directly from your PanelBuilder32 application. Use this log as a
guide to update your application accordingly. Modifications to the application
are required to verify that the application operates correctly in FactoryTalk
View ME software.
Open the Conversion Log
The conversion log, convert.log, is stored with the new application that was
imported into FactoryTalk View ME software.
Follow these steps to locate the conversion log on your computer.
1. Navigate to this folder.
C:\Documents and Settings\All Users\Documents\RSView
Enterprise\ME\HMI projects\
IMPORTANT It is important that you review each object and feature in the converted
application to verify that they function as expected. Because
PanelBuilder32 objects or features may not map directly into FactoryTalk
View ME software, you may need to update your ladder logic to achieve the
same operational results.
TIP All of your FactoryTalk View ME applications are located in this folder. This
includes new or imported applications.

Allen-Bradley PanelView Plus 7 Specifications

General

Operating System	Windows CE 6.0
Memory	512 MB RAM
Mounting	Panel mount
Display Type	Color TFT LCD
Processor	ARM Cortex-A8
Storage	512 MB Flash
Communication Ports	Ethernet, USB, Serial
Input Voltage	24V DC
Operating Temperature	0°C to 50°C (32°F to 122°F)
Environmental Rating	NEMA 4X
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Relative Humidity	5% to 95% non-condensing
Certifications	CE, UL, cUL
Display Sizes	4.3", 7", 10", 15", 19"
Touchscreen	Resistive or Projected Capacitive (depending on model)