Allen-Bradley PanelView Plus 7 - Before You Begin; Chapter 8; Introduction; What You Need

Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018 81
Chapter 8
Create the Runtime Application
Introduction
In this chapter, you create, download, and run the converted application with
all modifications on the PanelView™ Plus 7 terminal.
Before You Begin
• Review migration considerations (Chapter 1).
• Select a PanelView Plus 7 terminal replacement and adapter kit, if
necessary (Chapter 2).
• Optionally install the PanelView Plus 7 terminal in the existing
PanelView Standard panel cutout (Chapter 2).
• Import your PanelBuilder32 .pba application into FactoryTalk® View
ME software (Chapter 3).
• Review the conversion log for your migrated application (Chapter 4).
•Review object mapping (Chapter 5).
• Review unsupported features (Chapter 6).
• Qualify the runtime application (Chapter 7).
What You Need
• Converted FactoryTalk View ME application.
• Qualified runtime application.