Allen-Bradley PanelView Plus 7 - Reimport the Alarms XML File

116 Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018
Chapter 9 Optimize Runtime Performance
Reimport the Alarms XML File
Follow these steps to reimport the xml alarms file to your application.
1. Navigate back to the open instance of the FactoryTalk View Studio
software.
2. In the Application Explorer, right-click Alarm Setup and choose Import
and Export.
3. Select No to not back up the alarms.
4. Click Next.
5. To select the Alarms.xml file from created by the TCW utility, click the
... button.