Allen-Bradley PanelView Plus 7 Migration Guide

Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018 53
Chapter 4
Review the Application Conversion Log
Introduction
In this chapter, you review the conversion log generated by FactoryTalk® View
Machine Edition (ME) software for your imported application. The results of
this log help you to determine what updates are required in your converted
application.
Before You Begin
• Review migration considerations (Chapter 1).
• Select a PanelView™ Plus 7 terminal replacement and adapter kit, if
necessary (Chapter 2).
• Install the PanelView Plus 7 terminal in the existing PanelView Standard
panel cutout (Chapter 2).
• Import your PanelBuilder®32 .pba application into FactoryTalk View
ME software (Chapter 3).
What You Need
• The new name of the application that was imported into FactoryTalk
View ME software. This action was completed in Chapter 3.
• Conversion log, convert.log, generated by the FactoryTalk View ME
import wizard.
Follow These Steps
Follow this path to review changes that are required to your FactoryTalk View
ME application.
Open the Conversion Log
Review the Conversion Log
Page 54
About the Conversion Log
Page 54
Page 55

Allen-Bradley PanelView Plus 7 Specifications

General

Operating System	Windows CE 6.0
Memory	512 MB RAM
Mounting	Panel mount
Display Type	Color TFT LCD
Processor	ARM Cortex-A8
Storage	512 MB Flash
Communication Ports	Ethernet, USB, Serial
Input Voltage	24V DC
Operating Temperature	0°C to 50°C (32°F to 122°F)
Environmental Rating	NEMA 4X
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Relative Humidity	5% to 95% non-condensing
Certifications	CE, UL, cUL
Display Sizes	4.3", 7", 10", 15", 19"
Touchscreen	Resistive or Projected Capacitive (depending on model)