68 Rockwell Automation Publication 2711P-AP006C-EN-P - November 2018
Chapter 6 Review Unsupported Features
Caption and image placement All objects FactoryTalk View ME software supports one,
three, or nine positions for captions and
images, depending on the type of object.
On conversion, captions and images are
positioned using the closest match. Some
captions might do the following:
• Overlap images
•Get truncated
• Get clipped to fit the object
Realign or resize objects for best fit.
Goto Configure Mode Button Object not converted
Security Enable/Disable Security
Button
New Password Button
Verify Password Button
In the PanelBuilder32 software, user
passwords are create in the Configuration
mode screens. FactoryTalk View ME
software requires the Change Password
button on a display.
Security Settings FactoryTalk View ME software uses a
different method to assign security to
graphic displays.
You must reconfigure security. Once logged
on, the operator does not need to reenter
the password until manually logged off, or
optionally after an idle time.
Table 13 - Unsupported Features in FactoryTalk View Machine Edition
Unsupported Feature Object Additional Information
To Next Page
Loading...
